Table of Contents
Advertisement
3. Remove the old battery.
4. Fit a new battery (type CR-1620 3V or
equivalent) in the case with its negative
(−) side facing upward.
5. Put the case together by fitting the
mating part of the button side into the hook
on the key side.
6. Reinstall the screw on the transmitter
case.
CAUTION
. Do not let dust, oil or water get on
or in the transmitter when repla-
cing battery.
. Be careful not to damage the
printed circuit board in the trans-
mitter when replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
Double locking system (if
equipped)
The double locking system is an anti-theft
system. It operates when the doors are
locked using the key or remote transmitter.
While this system is operating, the power
door locking switch and door lock levers
inside the cabin cannot be used to unlock
the doors.
WARNING
Never set the double locking system
while passengers are inside the
vehicle. With the system set, people
in the vehicle would not be able to
open the doors from the inside. The
result could be serious injuries or
death.
& To set double locking system
! Setting system using key
1. Remove the key from the ignition
switch and have all occupants get out of
the vehicle.
2. Close all of the doors and the rear gate
(Station wagon) securely.
Keys and doors
3. Insert the key into the key cylinder of
the driver's door, then turn it in the locking
direction to set the double locking system.
All of the doors and the rear gate (Station
wagon) will be locked.
! Setting system using remote trans-
mitter
1. Remove the key from the ignition
switch and have all occupants get out of
the vehicle.
2. Close all of the doors and the rear gate
(Station wagon) securely.
– CONTINUED –
2-29
Advertisement
Chapters
Table of Contents
