Table of Contents
Advertisement
! Station wagon
1. Using a Phillips screwdriver, remove
the upper and lower clips.
2. Wrap tape around a flat-head screw-
driver, then insert the screwdriver into the
gap between the side cover and rear
combination lamp and use it as a lever
to undo the three clips in the illustrations
shown. Undo clips 2 and 3 in the same
way, then remove the side cover.
Maintenance and service
3. Remove the upper and lower screws.
Then, slide the rear combination lamp
assembly to the rear and remove it from
the vehicle.
1)
Tail stop light
2)
Rear turn signal light
– CONTINUED –
11-65
Advertisement
Chapters
Table of Contents
