Subaru Legacy Outback 2008 Owner's Manual page 66

We recommend that you contact your
SUBARU dealer if you have any question
regarding the installation of a child re-
straint system.
CAUTION
Always remove the head restraint
when mounting a child restraint
system with an upper anchorage
strap. Otherwise, it may happen that
the upper anchorage strap cannot
be fastened tightly.
! Station wagon
1. Remove the head restraint at the
seating position where the child restraint
system has been installed with the ISOFIX
anchor bars or seatbelt; lift up the head
restraint while pressing the release button.
Store the head restraint in the cargo area.
Avoid placing the head restraint in the
passenger compartment to prevent it from
being thrown around in the passenger
compartment in a sudden stop or a sharp
turn.
2. Open the cover flaps to use the
anchorages. Fasten the top tether hook
of the child restraint system to the appro-
priate top tether anchorage.
Seat, seatbelt and SRS airbags
3. Tighten the top tether securely.
CAUTION
Always remove the head restraint
when mounting a child restraint
system with a top tether. Otherwise,
it may happen that the top tether
cannot be fastened tightly.
1-41