Power And Sound Controls (Mcintosh Audio); Power Switch; Volume, Tone And Balance Control - Subaru Legacy Outback 2008 Owner's Manual

NOTE
. When you adjust the audio system,
if you press the "TONE" or "BAL"
button for more than 1 second or do
not operate it for more than 5 seconds,
it returns to its original display.
. SRS technology is incorporated un-
der license from SRS Labs, Inc. SRS
WOW, SRS and symbol are trade-
marks of SRS Labs, Inc.
The SRS WOW mode has the following
qualities.
. Natural feeling of stereophonic
effect
. Rich and varied bass sound
. Crystal-clear sound
Power and sound controls
(McIntosh audio)
& Power switch
The dial is used for both power (ON/OFF)
and volume control. The radio is turned
ON and OFF by pushing the dial, and the
volume is controlled by turning the dial.
The dial can also be used for tone and
balance adjustment.
& Volume, tone and balance
control
! To adjust the volume
Turn the "ON/VOL" dial to adjust the
volume.
Turn the dial clockwise to increase the
volume.
Turn the dial counterclockwise to de-
crease the volume.
The volume will be shown as a number
(from a minimum of "00" to a maximum of
"40") on the display.
If your vehicle has an AUX jack (if
equipped) and when an AUX product is
connected to it, the volume control mode
automatically turns to the AUX volume
control mode.
– CONTINUED –
5-9
Audio