Headlight Washer (If Equipped); Mirrors; Inside Mirror - Subaru Legacy Outback 2008 Owner's Manual

Headlight washer (if
equipped)
With the ignition switch in the "ON"
position and the headlight switch in the
" " position, the windshield washer
operates first when you press the wind-
shield washer button. If you continue
pressing the button for more than 1
second, the headlight washer then oper-
ates together with the windshield washer.
The windshield washer stops spraying
washer fluid as soon as you release the
windshield washer button. The headlight
washer sprays the washer fluid for ap-
proximately 1 second and then stops
automatically.
CAUTION
Do not operate the washer if the
washer fluid tank is empty. This may
cause overheating of the washer
motor. Check washer fluid level
frequently, such as at fuel stops.
NOTE
When the area around the nozzle cover
of the headlight washer is frozen,
remove the ice before using.
Instruments and controls

Mirrors

Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
& Inside mirror
The inside mirror has a day and night
position. Pull the tab at the bottom of the
mirror toward you for the night position.
Push it away for the day position. The
night position reduces glare from head-
lights.
– CONTINUED –
3-63