Table of Contents
Advertisement
SETTING UP THE NETWORK
5
Once the IQ WIFI has powered up
completely, the power LED will stop flashing.
Activate WPS on IQ Panel. (Open settings
tray, touch settings, advanced settings, type
valid code, choose WI-FI.)
*Please note: Connecting manually from IQ Panel choose Network Name (SSID) IQ WIFI XXXXXX (the "X" represents the MAC address
printed on the label located on the bottom of the IQ WIFI). Default password is the serial number printed on the bottom label of the IQ WIFI.
*Using WPS mode, IQ WIFI will auto connect to 2.4 or 5 GHz based on optimized signal per environment.
6
Touch "WPS Push Button"
7
Touch "CONNECT"
JOHNSON CONTROLS CONFIDENTIAL AND PROPRIETARY
PAGE
11
OF
45
8
Press the physical
WPS button on IQ WIFI
9
IQ Panel will confirm when
connection is complete. (If,
fails repeat from step 5)
Advertisement
Table of Contents
Need help?
Do you have a question about the IQ WIFI and is the answer not in the manual?