Canon Optura 400 Instruction Manual page 137

❍ Do not change the operating mode while the camcorder is connected to a
computer.
❍
Do not press the CARD STILL/MOVIE button while the camcorder
is connected to a computer.
❍ Only still images in JPEG format and movies in Motion JPEG format can be
transferred.
❍ You can press the SET dial in place of the
IMAGES], [ NEW IMAGES] or [
message appears. Turn the SET dial to select [OK] and press the SET dial.
❍ To cancel transfer, turn the SET dial to select [CANCEL] and press the SET dial,
or press the MENU button.
❍ When transferring with the
setting even if you turn it off or change the position of the TAPE/CARD switch.
When you have selected [
screen to select a still image appears. Press the MENU button to display the
direct transfer menu.
❍ When the protect switch of the SD Memory Card is activated during image
transfer, the images will not be marked as "already transferred", and will be
transferred again when you select [
button. With [
TRANSFER ORDERS], a confirmation
button, the camcorder retains the transfer
SELECT & TRANSFER] or [
NEW IMAGES] later.
ALL
WALLPAPER], the
E
137