Images are automatically assigned file numbers and stored in folders containing up to
100 images. (The sample images on the supplied memory card are saved in the
Still images: File numbers: 0001-9900, folder numbers: 101-998
Movies: File numbers: 001-999, folder numbers: 001-999
Still images/movies: File numbers: 0001-9900, folder numbers: 101-998
To change the setting, open the menu and select [CARD SETUP]. Select
[FILE NOS.], set it to [RESET] and close the menu.
The file number will be reset each time a new memory card is
inserted. If the memory card already contains image files, the
consecutive file number will be assigned.
The camcorder memorizes the file number of the last image and
assigns the consecutive file number to the next image, even when a
new memory card is inserted. (If a higher file number already exists
on the memory card, the consecutive number will be assigned.)
There will be no duplication of file numbers. This is useful for
organizing images on a computer.
When you record 3 images.
When you replace the memory
card and record an image.