Download Print this page

Canon Optura 400 Instruction Manual Page 154

Canon optura 400: instruction manual.
Hide thumbs

Advertisement

Memory Card Operation
Memory card cannot be
inserted.
Memory card cannot be
recorded.
Memory card cannot be
played back.
Camcorder does not
display movies in CARD
PLAY mode.
Image cannot be erased.
"
" flashes red.
Printing
The printer is not
operating even though
camcorder and printer
are correctly connected.
Shaded area : OPTURA500 only.
154
Memory card was not facing
the correct direction.
Memory card is full.
Memory card is not formatted.
Memory card is not inserted.
File number reached
maximum value.
SD Memory Card is
protected.
Camcorder is not set to
CARD PLAY mode.
Memory card is not inserted.
The camcorder displays the
still image playback mode.
The movie was recorded in
Motion JPEG format with
another camcorder.
Image is protected.
SD memory card is
protected.
Card error occurred.
The camcorder is set to
NETWORK mode.
The camcorder displays the
movie playback mode.
[
CONNECT] is set to
[STORAGE].
Turn the memory card over
and reinsert it.
Replace the memory card or
erase images.
Format the memory card.
Insert a memory card.
Set [FILE NUMBERS] to
[RESET] and insert a new
memory card.
Change the position of the
protect switch.
Set the camcorder to CARD
PLAY mode.
Insert a memory card.
Press the CARD STILL/MOVIE
button to switch to MPEG-4
movie playback.
Motion JPEG movies are
displayed in still image
playback mode. Press the
CARD STILL/MOVIE button to
switch to still image playback.
Cancel the protection.
Change the position of the
protect switch.
Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
1. Set the camcorder to
CARD PLAY mode.
2. Disconnect and reconnect
the USB cable.
3. Turn off the printer and
turn it back on.
Press the CARD STILL/MOVIE
button to display the still
image playback mode.
Set [
CONNECT] to
[STANDARD].
93
93
120
93
96
93
111
93
111
111
114
93
120
-
111
134

Advertisement

   Related Manuals for Canon Optura 400

Comments to this Manuals

Symbols: 0
Latest comments: