User Information; Information Regarding Operating Instructions; Warranty And Liability; Transport, Storage, Place Of Installation - IKA C 200 Operating Instructions Manual

User information

2.1 Information regarding operating instructions

General hazard
This symbol indicates information which is essential for the safety of
your health. Failure to observe this information can cause damage to
health and injuries.
This symbol indicates information which is important for ensuring that
the appliance functions without any technical problems. Failure to
observe this information could damage the calorimeter system.
This symbol indicates information which is important for ensuring that calori-
metric measurements are performed efficiently and for using the calorimeter
system. Failure to observe this information can result in inaccurate measu-
rements.
This symbol indicates references to the optimization of operatinal sequences
TIP
are characterized.
Attention - Risk of damage due to magnetism.
Numbers , ,  etc. indicate guidelines in the following sections which
must always be carried out in order.

2.2 Warranty and liability

Please read these operating instructions carefully.
You have purchased an original IKA product,
IKA- WERKE only consider themselves to be
manufactured to the latest, highest quality stan-
responsible for the safety, reliability and perfor-
dards. According to IKA's conditions of warran-
mance of the appliance when
ty, this product is guaranteed for 12 months.
• the appliance has been operated in accordance
To ensure the long-term precision and function
of the calorimeter system, we recommend that
• only persons authorised by the manufacturer
you conclude a maintenance agreement (annu-
al maintenance) with IKA or an authorised IKA
• only original parts and original accessories are
workshop. If the first maintenance is carried out
within 12 months of purchase, the warranty will
IKA- WERKE do not accept liability for damage
be extended to 24 months.
or costs resulting from accidents, misuse of the
In the case of a warranty claim, please contact
appliance or unauthorised changes, repairs or
the responsible representative or the supplier.
upgrades.
You can also return the appliance directly to IKA-
WERKE.
Please enclose the sales invoice and the reason
for the claim and state the name of the contact
person at your company. Freight charges are to
be paid by the sender.
with the operating instructions,
interfere with the appliance,
used for repairs.
8

Transport, storage, place of installation

3.1 Conditions of transport and storage

• Only the original packing may be used for
• The system must be protected against mecha-
nical impact, vibrations, dust deposits and cor-
• The appliance must be completely emptied be-
rosive ambient air during transportation and
storage.
• It is also important to ensure that the relative
humidity does not exceed 80%.

3.2 Place of installation

Please observe the respective country-specific re-
• The (constant) room temperature should be
gulations for operating pressure equipment when
installing the appliance. A constant ambient tem-
• The system must be installed on a level surface.
perature is an important requirement for ensuring
• An adequate power supply corresponding to
the high measuring accuracy of the system. The
following conditions must therefore be fulfilled at
• Oxygen supply (99.95 % pure oxygen, quality
the place of installation:
• No direct solar radiation
• No draughts (e.g. beside windows, doors, air
conditioning)
• Sufficient distance to radiators and other heat
sources

3.3 Unpacking

• Please unpack the device carefully
• In the case of any damage a report must be
sent immediately (post, rail or forwarder)

3.4 Delivery scope

1 x Basic device C 200 1 x Power cable
1 x Decomposition vessel C 5010 1 x Operating instructions
1 x Ignition adaptor 1 x Water emptying hose (length: 1 m)
1 x Attachment set 1 x Oxygen station C 248
1 x Table power supply 1 x Measuring cup (2 l)
transportation.
fore storing and transportation.
around 20 °C ... 25 °C
the nameplates on the system components.
3.5; pressure 30 bar) with pressure display and
shut-off device (C 29 reducing valve, acces-
sories)
9