Assembly - Weslo cadence G-40 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
In addition to the included hex keys
adjustable wrench
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-
aging parts, do not use power tools for assembly. Extra hardware may be included.
19mm Tek
Screw (26)–6
M5 Star
Washer (7)–2
M8 Star
Washer (5)–6
M10 Star
Washer (9)–2
, assembly requires a Phillips screwdriver
, and needlenose pliers
16mm Screw 19mm Screw (10)–4
(85)–2
M6 Flat
Washer (32)–4
M10 Flat
Washer (14)–2
M8 Nut (46)–2
M8 Flat
Washer (72)–4
M6 Nut (43)–4
.
#10 x 1" Tek
Screw (58)–2
M8 x 52mm Bolt (82)–2
M6 x 58mm Bolt (13)–4
M10 x 58mm Bolt (2)–4
M10 x 110mm Bolt (1)–2
6
, an
M8 x 15mm
Bolt (8)–6