Weslo cadence G-40 User Manual page 12

11. Start an M8 x 15mm Bolt (8) with an M8 Star
Washer (5) into each Upright (53, 54). Then,
firmly tighten all six M8 x 15mm Bolts (8).
With the help of a second person, carefully
lower the Uprights (53, 54) to the floor.
12. See the lower drawing. Position the Uprights
(53, 54) so that the treadmill Frame (51) is cen-
tered between the Uprights.
Firmly tighten the M10 x 110mm Bolt (1) and the
two M10 x 58mm Bolts (2) on each side of the
treadmill. Be careful not to overtighten the
M10 x 110mm Bolts.
11
8 5
12
54
12
8
53
8
8 5
1
53, 54
51
Top View
51
54
2
53