Landis+Gyr E650 Series User Manual page 82

82/84
D: Measuring type
[1 ... 73, F, P]
E: Tariff
[1 ... 9]
F: Stored value
[01 ... 99]
Display code
Examples
© Landis+Gyr
Defines types, or the result of the processing of physical quantities
according to various specific algorithms. The algorithms can deliver energy
and demand quantities as well as other physical quantities.
The following list is an excerpt.
Capture period
Cumulated minimum
Cumulated maximum
Minimum
Running average
Last average
Maximum
Instantaneous value
Time integral 1 (energy status)
Time integral 2 (energy consumption)
Time integral 3 (excess consumption)
...
Test average
Test time integral 4
...
Error message
Load profile
Defines the further processing of measurement results to tariff registers,
according to the tariffs in use. Total values are marked with '0'. For abstract
data or for measurement results for which tariffs are not relevant, this value
group can be used for further classification.
Defines the storage of data according to different billing periods. Where this
is not relevant, this value group can be used for further classification.
To simplify the reading of the display code, individual parts of the OBIS
code can be omitted. The abstract or physical data C and type of data D
must be shown.
1.8.0 1 = all-phase active power in positive direction
8 = cumulative value (meter reading)
0 = total energy (no tariffs)
0.9.1 Local time
D000030108 en m – E650 Series 3 – ZMD300AT/CT – User Manual
Appendix 1 OBIS code
1 2 3
1 11 21
2 12 22
3 13 23
4 14 24
5 15 25
6 16 26
7
8
9
10
55
58
F
01