Faceplates - Landis+Gyr E650 Series User Manual

Mechanical construction
3.2

Faceplates

Main faceplate
D000030108 en m – E650 Series 3 – ZMD300AT/CT – User Manual
Figure 25. Seal component for use with padlock
The faceplate is divided into two parts and is designed to customer
specifications. It contains all relevant data about the meter.
The main faceplate is situated behind the plastic viewing window, which is
secured by a certification seal. Recesses permit operation of the display
buttons "down" and "up" for control of the liquid crystal display.
1
13 Cl. 1
Three-phase four-wire meter
12
ZMD310CT44.4207 S3
3 x 230/400 V
11
10
9 T1 T2 T3
Figure 26. Main faceplate (example ZMD310CT)
1 Optical test output reactive energy
(with accuracy class – ZMD300CT only)
2 Meter constant R1 (referred to primary values) or R2
3 Optical test output active energy (with accuracy class)
4 Optical interface
5 Approval symbol
6 Type of connection
7 Display button "up"/Display button "down"
8 Symbol for double protective insulation
9 Status indication
10 Arrows for present status indication
11 Liquid crystal display (LCD)
12 Meter data (type designation, serial number, rated values, year of
construction)
13 Alert LED (optional)
The operating elements and displays are described more detailed in
section 5 "Operation".
2 3
Landis+Gyr E650
imp imp
1000 Cl. 1
kvarh kWh
Nr. XX XXX XXX
10(80) A 50 Hz
20XX
Readout
SET Test
© Landis+Gyr
33/84
4
5
6
7
8