Anti-Tampering Features - Landis+Gyr E650 Series User Manual

28/84
.MAP110
MAP120
2.9

Anti-tampering features

© Landis+Gyr
The .MAP110 Service Tool covers the following applications normally
required for meter installation and in the service sector:

Billing data readout

Readout and export of profiles (load profile(s), stored values and event
log, dedicated event logs)

TOU (Time of Use) readout and modification

Billing period reset

Register and profile resets

Setting of certain parameter ranges, such as primary data, time switch,
communication parameters, etc.

Communication input settings

Communication settings for Landis+Gyr communication units readout
and modification

GSM installation aid for Landis+Gyr communication units (field
strength indicators, telephone number information, PIN-code handling)

Test SMS message transmission

Analysis and diagnostic functions
The Landis+Gyr MAP120 software is used to parameterise the meter and
the communication unit, i.e. it is possible to read out and modify all device
parameters.
In contrast to communication devices from other manufacturers, no
additional software and training costs are incurred by the use of Landis+Gyr
communication units, since the MAP software tools support both meters
and communication units.
The following anti-tampering features are available for ZMD310xT meters:

DC magnet detection for the detection of strong magnetic fields close
to the meter. This feature is installed during the manufacturing
process.

Terminal cover detection for the detection of situations when the
terminal cover has been opened. This feature can be a retrofit or an
integrated version. The integrated version is available if the DC
magnet detection option is selected and must be integrated during
manufacturing process.

Example of integrated terminal switch available from mid-2012.
D000030108 en m – E650 Series 3 – ZMD300AT/CT – User Manual
Device description