Table of Contents
Advertisement
Section
7
General
Decadic/DTMF Dialing Type
DTMF Dialing Rate 1
On-Hook Time
8380-373-115-ES
Issue 1, December 1995
Line and Trunk Options
When programming line and trunk options you should remember the trunk is not automatically
related to Route 1, it may use Route 2, etc.
Line and trunk refer to the physical line that is supplied by your telephone company. Route refers
to the way the Controller will attempt to route the call through the PTT.
All entries in this part are a predetermined length. When you have entered the correct number of
digits, the Controller will automatically accept the entry and route as programmed.
Register 100
Enter 100T
Register 102
Enter 102T
Register 103
Enter 103T
Description
(where T =)
0 for loop start, decadic
9
2 for loop start, DTMF
Description
(where T =)
9
∗
4 for 80 ms
for 140 ms
5 for 90 ms
# for 150 ms
6 for 100 ms
C for 160 ms
7 for 110 ms
D for 170 ms
8 for 120 ms
E for 180 ms
9 for 130 ms
F for 190 ms (slow)
Description
(where T =)
0 for 150 ms
1 for 260 ms
2 for 300 ms
3 for 340 ms
4 for 380 ms
5 for 420 ms
Fax Business Controller - 21
6 for 460 ms
7 for 500 ms
9
8 for 700 ms
9 for 1100 ms
∗
for 1300 ms
# for 2500 ms
Advertisement
Table of Contents
