4.6.6 Program the MiVoice Business System
1.
Program the MiVoice Business system using one of the following options:
•
Mitel Integrated Configuration Wizard (only if you have cleared the Enable secure
EX controller access check box (step 6) in the
Deployment Tool to Install the MiVoice Business Virtual Machine
•
Manually, by logging into the MiVoice Business System Administration Tool
2.
(Optional) If you are migrating from an unsupported 3300 ICP controller, continue
with step 6 of the Migration Guidelines for an Unsupported 3300 ICP Controller
procedure (Chapter 4 Migration) in the MiVoice Business Migration Guidelines
document.
4.6.7 Trunk Configuration
After you perform the basic programming of the MiVoice Business System Administration
Tool, you can configure trunks automatically by executing configuration scripts in the
Gateway Configuration Scripts form (Trunks > Enterprise Gateways) of the MiVoice
Business System Administration Tool.
Note:
On the EX platform, individual trunk access is not supported as ISDN, T1, and FXO
trunks are not assigned trunk numbers when programmed.
EX Controller Installation and Administration Guide
Running the EX Controller
on page 31)
Software Installation
46