Download  Print this page

Mac Address; Set To Default; Wired Enable; Wlan Enable - Brother HL-5450DN Network User's Manual

Multi-protocol on-board ethernet print server and wireless ethernet print server.
Hide thumbs

Advertisement

Control panel setup
Channel
This field displays the current wireless network channel.
Speed
This field displays the current wireless network speed.
SSID
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID
name.
Comm. Mode
This field displays the current wireless network communication mode.

MAC Address

The MAC address is a unique number assigned for the machine's network interface. You can check your
machine's MAC address from the control panel.

Set to Default

The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want
to reset both wired and wireless settings, see Reset the network settings to the factory default uu page 40.

Wired Enable

If you want to use the wired network connection, set Wired Enable to On.

WLAN Enable

If you want to use the wireless network connection, set WLAN Enable to On.
Note
If a network cable is connected to your machine, set Wired Enable to Off.
4
4
4
4
4
4
4
4
4
39

Advertisement

Table of Contents

   Related Manuals for Brother HL-5450DN

This manual is also suitable for:

Hl-5470dwHl-5470dwtHl-6180dwHl-6180dwtHl-5450dnt

Comments to this Manuals

Symbols: 0
Latest comments: