York YK Style H Operation Manual page 132

Table 131: Programmable
V09 software
Button
and earlier
Standard Week
Start/Stop Operator
Times
Exception Start/
Operator
Stop Times
Schedule
(Enabled / Operator
Disabled)
Repeat Sunday
Operator
Schedule
Reset All
Operator
Exception Days
Select Operator
Print View
Table 132: Navigation
V09 software
Button
and earlier
Home View
Setup View
132
V10 and later
with YORK
Description
Chiller Access
Manager
For each day of the week, the user may specify a time for the chiller to
Standard start and a time for the chiller to stop. The times specified in this entry
week will be used as the default for every week of chiller operation.
For each day of the week, the user may specify a time for the chiller to
start and a time for the chiller to stop. These Start/Stop combinations may
be scheduled up to five weeks in advance and also for the present week.
Standard
As each week goes by, the new schedule will be created for the present
week using the Exception specification in combination with the Standard
week definition, as described above.
Allows the user to enable or disable the monitoring function which
Standard
enforces the scheduled starting and stopping of the chiller.
Duplicates the schedule defined for Sunday for the remainder of the
Standard
standard weekdays.
Standard Deletes all programming for exception days within the next 6 weeks.
Places a selection box around a start time for a given day. Use ◄ , ► , ▲
Standard or ▼ cursor arrows to place the box around the desired start or stop time
for a given day.
View Generates a Schedule print report.
V10 and later
with YORK
Description
Chiller Access
Manager
View Returns the user to Home screen.
View Returns to the previous Setup screen.
Model YK Style H Centrifugal Liquid Chillers with OptiView Control Center