Bezel Operation; Keypad Led Operation And Printer Status Conditions; Table 2-1 Bezel Display Status; Table 2-2 Keypad Led S Status Reporting - FutureLogic PSA-66-001N Operator's Manual

2.4

Bezel Operation

The front bezel display allows the operator to determine the state of the printer on the casino floor, at a
distance, without disturbing the game. The table below lists the various conditions which the bezel
indicates.
Solid On
Slow Blink
Fast Blink
Off
2.5

Keypad LED Operation and Printer Status Conditions

The keypad LEDs provide a more detailed reporting of system status. Table 2-2 below lists the status of
the keypad LEDs in a variety of status which are defined following.
Unit in Powered Off
Unit Ready
Unit Flushed
Paper out
Head Up
Temperature Error
Voltage Error
Print Head Error
Missing Black Index Mark
Paper Jam
Although there are a variety of error conditions which can occur, most printer errors are a result of the
printer running out of paper or the operator raising the head up lever. This section lists the possible error
which can occur, and how the condition is remedied.
P O : This condition results when the printer detects that paper is not present. The printer scans
APER UT
for a paper out condition at all times. Remedy the condition by loading a new paper stack.
H U : This condition results from lowering the head release lever. To remedy the error, it is
EAD P
necessary to raise the blue lever on the side of the unit.
UM-STO-C Revision C
Table 2-1
Bezel Display
Table 2-2 Keypad LEDs Status Reporting
CONDITION
Operators and Technicians
Manual
PSA-66-001N
PSA-66-ST
Bezel Display Status
Printer Idle and Ready
Paper low or Printer Error
Ticket Printing and/or Ticket in chute
Printer power off
STATUS_LED
0FF 0FF
ON OFF
ON ON
OFF ON
OFF ON
OFF MED BLINK
OFF SLOW BLINK
ON FAST BLINK
ON FAST BLINK
ON FAST BLINK
Status
ERR_LED
10