Storing Speed Dial Numbers - Brother MFC-6650MC Owner's Manual

72
C H A P T E R S E V E N
See
Speed Dialing
p. 76
5
Use the dial pad to enter the name (up to 15 characters). You can use the
chart on page 34 to help you enter letters—OR—Go to Step 6 to store
the number without a name.
6
Set
Press . The screen prompts you to select the type of number this is. Use
or to select the type you want.
FAX a fax only number
TEL a telephone (voice) number
FAX/TEL both fax and telephone (voice) number
7
Press Set .
8
Return to Step 2 to store another One-Touch number—OR—Press
When you dial an AUTO DIAL number, the screen displays the name you've
stored, or, if you haven't stored a name, the number you've stored.
If you need to store a pause longer than 3.5 seconds, press
more times.
Even if you lose electrical power, numbers stored in memory will not be lost.

Storing Speed Dial Numbers

You can store Speed Dial numbers, so you can dial by pressing only three
keys (and ). There are 100 Speed Dial locations. Even if you lose
Start
electrical power, numbers stored in memory will not be lost.
1
Press , ,
Function
1
The screen prompts you to enter a location.
SPEED-DIAL? #
2
Use the dial pad to enter a two-digit location (00–99).
3
Press . The screen displays your entry, then prompts you to enter the
Set
number you're storing.
#05:
ENTER & SET
4
Enter the number (up to 20 digits).
5
Press . The screen now prompts you to store a name with this number.
Set
NAME:
, .
6 2
to exit.
Stop
two or
Redial/Pause