Paper Capacity In Feeder; Connecting An External Telephone Answering Device (Tad); Sequence - Brother MFC-6650MC Owner's Manual

M F C S E T U P A N D C O N N E C T I O N S

Paper Capacity in Feeder

Multi-purpose
Sheet Feeder:
Output Tray:
Basis Weight
Caliper
Moisture Content
Smoothness
(Sheffield)
Recommended paper types:
Cut sheet:
Label:
Transparency:
Connecting an External
Telephone Answering Device (TAD)

Sequence

You might choose to connect an additional answering system. When you
have an external TAD on the same telephone line as the MFC, the TAD
answers all calls. The MFC "listens" for fax calling (CNG) tones. If it hears
them, the MFC takes over the call and receives the fax. If it doesn't hear
CNG tones, the MFC lets the TAD continue playing your outgoing message
so your caller can leave you a voice message.
The TAD must answer within four rings (the recommended setting is two
rings). The MFC cannot hear CNG tones until the TAD has answered the
call, and with four rings there are only 8–10 seconds of CNG tones left for
the fax "handshake." Make sure you carefully follow the instructions in this
manual for recording your outgoing message.
Up to 0.87 inch (22 mm) in height (up to the mark)
Approx. 200 sheets of 20 lb. (75 g/m
of 42 lb. (158 g/m 2 ) Letter/A4 paper, or 10
envelopes
Approx. 100 sheets of 20 lb. (75 g/m
paper
Cut Sheet
16 to 42 lb.
2
(60 to 158 g/m )
0.03 to 0.08 in.
(0.08 to 0.2 mm)
4% to 6% by weight
100 to 250 (Sheffield)
Xerox 4200
Avery laser label or equivalent
3M CG3300 for laser printers or equivalent
19
2
) or 50 sheets
2
) Letter/A4
Envelope
20 to 24 lb.
2
(75 to 90 g/m )
single thickness
0.0033 to 0.0058 in.
(0.084 to 0.14 mm)
single thickness
4% to 6% by weight
100 to 250