U S I N G T H E M F C W I T H Y O U R C O M P U T E R
There are four sub menus (see table below). Select the sub menu you want
by clicking on it with the mouse, using the cursor keys and the Enter key,
or by pressing the hot key commands for that sub menu.
Menu
Press the keys
Direct
Alt + D
Access
Printer
Alt + P
Setup
Console
Alt + C
for Config
Guide
Alt + G
Help
F1
Functions
You can directly control the MFC, with Print
Form, Reset Printer.
You can enter the setting mode to change other
printer settings, such as, margin settings,
continue mode, reprint function, font and sleep
mode.
You can change the environment settings
the RPC program: color, Status Monitor
configuration, etc.
You can go to the Guide mode.
You can get Online Help: If you press F1, you
can get information on a highlighted item.
125