To Print A Report; Transmission Verification (Xmit) Report; Activity Report Interval - Brother MFC-6650MC Owner's Manual

88
C H A P T E R T E N

To Print a Report

1
Press , ,
Function
1
2
Enter the number (see page. 87) of the report you want to print. For
example, press
4
3
Press .
Start
4
Press to exit.
Stop

Transmission Verification (Xmit) Report

You can use the Xmit Report as proof that you sent a fax. This report lists
the time and date of transmission, and whether the transmission was
successful.
When the feature is OFF, the report is printed automatically only if there's an
error during transmission. If the report indicates NG, send the document again.
If the report indicates you should check the readability of certain pages, resend
those pages.
When the feature is ON, the report is printed with every fax you send.
1
Press , ,
Function
1
2
Press or to select ON or OFF.
3
Press .
Set
4
Press to exit.
Stop

Activity Report Interval

You can set the MFC to print activity reports at specific intervals
(6, 12, 24 hours, 2, 4 or 7 days). If you set the interval to OFF, you can
print the report by following the steps in the previous section.
1
Press , ,
Function
1
2
Press or to display:
INTERVAL?
3
Press .
Set
4
Press or to choose your setting. If you choose 7 days, the screen
prompts you to choose a day at which to begin the 7-day countdown.
5
When the screen displays the setting you want, press
6
Enter the time to begin printing, in 24-hour format. (For example: enter
19:45 for 7:45 PM).
7
Press .
Set
8
Press Stop to exit.
.
7
to print the TEL. INDEX.
, .
7 1
, .
7 2
.
Set