Siemens SIMATIC NET RUGGEDCOM RST916P Installation Manual page 22

To connect the failsafe alarm relay, do the following:
1.
2.
RUGGEDCOM RST916P
Installation Manual, 04/2021, C79000-G8976-1489-01
Insert the failsafe alarm relay terminal block into the device and tighten the
screws.
Figure 2.7 Assembling the Failsafe Alarm Relay Terminal Block
Connect a failsafe device to the terminal block.
Failsafe Alarm Relay Terminal Block
1
Normally Open
2
Common
3
Normally Closed
4
Figure 2.8 Failsafe Alarm Relay Wiring
2.5 Connecting the Failsafe Alarm Relay
1 2 3 4
Installing the Device
13