Certification
The RUGGEDCOM RST916P device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1
Approvals
This section details the standards to which the RUGGEDCOM RST916P complies.
6.1.1
CSA
This device meets the requirements of the following Canadian and U.S. standards
under certificate CSA 21CA80047239:
•
•
•
•
•
•
•
•
RUGGEDCOM RST916P
Installation Manual, 04/2021, C79000-G8976-1489-01
CAN/CSA C22.2 No. 62368-1-07 AMD 2:2014
Information Technology Equipment – Safety – Part 1: General Requirements
CSA Std. C22.2 No. 213-17
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous
Locations
CAN/CSA-C22.2 No. 60079-0:19
Explosive Atmospheres – Part 0: Equipment – General Requirements
CAN/CSA-C22.2 No. 60079-7:16
Explosive atmospheres — Part 7: Equipment protection by increased safety "e"
CAN/CSA-C22.2 No. 60079-15:18
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection "n" Electrical Apparatus
ANSI/UL 62368-1-2014
Information Technology Equipment – Safety Part 1: General Requirements
UL 121201 Ninth Edition
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
ANSI/UL 60079-0:19
Electrical Apparatus for Explosive Gas Atmospheres – Part 0: General
Requirements
6
33