ABB ACS 160 User Manual page 134

Non-compliance with EN 61800-3 EMC Standard
When EMC requirements do not need to be fulfilled, the maximum motor cable lengths are
specified in Table 12 below.
Table 12 Maximum motor cable lengths (m / ft)
Wall mounting without
EMC filter
Type
ACS 163-1K1-3-D / -U
ACS 163-1K6-3-D / -U
ACS 163-2K1-3-D / -U
ACS 163-2K7-3-D
ACS 163-4K1-3-D / -U
Output chokes can be used to increase motor cable length as specified in Table 13. The enclosure
rating for output chokes is IP20
Table 13 Maximum motor cable lengths with output chokes (m / ft)
Type
ACS 163-1K1-3-D / -U
ACS 163-1K6-3-D / -U
ACS 163-2K1-3-D / -U
ACS 163-2K7-3-D
ACS 163-4K1-3-D / -U
1) Supply voltage 380-480, switching frequency 4 kHz.
2) If the supply voltage is higher than or equal to 440 V the maximum cable length is 100 m.
Motor Mounted Units
Compliance with EN61800-3 EMC Standard
Second Environment
ACS 160 types ACS 163-xKx-3-B, -S comply with the requirements of EN 61800-3 Second
Environment, Unrestricted and Restricted Distribution, with switching frequency of 4 kHz or 8 kHz,
when mounted on the top of the motor.
For EMC information concerning ACS 160 types 163-xKx-3-A, -R please contact your local ABB
supplier.
First Environment
ACS 160 types ACS 163-xKx-3-B, -S comply with the requirements of EN 61800-3 First
Environment, Unrestricted and Restricted Distribution, with switching frequency of 4 kHz or 8 kHz,
when mounted on the top of the motor.
124
Input voltage
Switching frequency
400 V
4 kHz 8kHz
m / ft m / ft
40 / 131 20 / 66
60 / 197 40 / 131
80 / 262 60 / 197
100 / 328 80 / 262
100 / 328 100 / 328
Input choke
ACS-CHK-A3
ACS-CHK-A3
ACS-CHK-B3
ACS-CHK-B3
ACS-CHK-C3
500 V
4kHz 8kHz
m / ft m / ft
20 / 66 10 / 33
20 / 66 10 / 33
20 / 66 10 / 33
40 / 131 30 / 98
80 / 262 80 / 262
1)
output choke
ACS-CHK-B3
ACS-CHK-B3
ACS-CHK-B3
ACS-CHK-C3
ACS-CHK-C3
Max motor cable
length (m / ft)
60 / 197
80 / 262
100 / 328
2)
120 / 394
2)
140 / 459
ACS 160 User's Manual