Welch Allyn CP 20 User Manual page 55

CP20_____________________________________________________________________________
To batch transmit of all records in the directory, select F1 (Batch). If a batch transmission is selected, only those
records, which have not been previously transmitted or marked deleted, will be transmitted.
An ECG may be listed in the directory but have a "deleted status" (indicated by "X"). The directory saves those
records that have been marked for deletion in the event that you may want to recover the ECG at a later time. All
stored ECGs will remain in the directory until it becomes full, at this time, the CP 20 will automatically remove a
record, based on its size, in order to make room for the new ECG. Only those records that have been marked for
deletion will be removed. Records are automatically marked for deletion based on the Delete Rule configuration.
To manually mark an ECG record for deletion, press Delet (F4) and an "X" will appear in the far right hand column
of the directory and to remove the delete status, select F4 again.
To transmit one ECG, select F2 (Selec) to choose a record from the patient directory.
Use (F1) to navigate down the directory list and Shift (F1) to move up the list. Similarly, use (F2) to page down
and Shift (F2) to page up through the directory. To quickly find and select a patient name, use the keyboard to
enter the first letter(s) of the last name. The letters will be displayed on the lower left corner of the LCD and the
desired name will automatically be highlighted. When the desired record is highlighted, use F3 (Xmt) to transmit
the individual ECG.
The following screen appears during a batch transmission or for a single record transmission:
After the transmission of your record(s), the Real-Time ECG View is displayed.
A-2