Welch Allyn CP 20 User Manual page 23

CP 20_______________________________________________________________________Section 2
To load the paper:
Remove the outer packaging from the paper stack.
Facing the front of the unit, use the release latch on the left side and slide the paper tray cover to the
left.
Place the stack of thermal paper into the paper tray such that the grid side of the paper is up when it is
pulled over the paper tray cover. The paper cue mark (a small black rectangle) should be in the lower
left corner.
Manually advance one page of paper beyond the closure point of the writer. Make sure the paper lays
on the black roller evenly within the channel of the paper door.
Slide writer cover to the right until the cover latches in a locked position. You will hear a sharp click
when the door is properly latched.
WARNING: Risk of injury to fingers in writer paper door or platen drive mechanisms.
2-2