Configuration - Welch Allyn CP 20 User Manual

CP 20_______________________________________________________________________Section 3
Append to ECG
A status or statement phrase can be appended to the ECG and printed under the interpretive text printout. Either
"unconfirmed" or "reviewed by" can be selected. However, if you wish to have nothing appended to the ECG,
blank may be selected.
Configuration Page 3
Number of Copies
This option defines the number of printed copies when an ECG is taken. A zero (0) setting prints the original only;
one (1) prints the original plus 1 copy; two (2) prints the original plus 2 copies, and so on. Up to 9 copies may be
selected.
Delete Rule
This option defines the ECG auto delete status in the patient directory. ECGs that are marked for deletion will be
automatically removed or erased based on their record size to make room necessary for the new ECG record. ECGs
are only erased from the directory when they are marked for deletion and if the directory becomes full. The delete
rule selections are:
Post Plot = ECG is automatically marked deleted after printing.
Post Transmit = ECG is automatically marked deleted after transmission.
Post Plot/Transmit = ECG is automatically marked deleted after transmission and printing.
Auto Save ECG
This option defines whether or not the CP 20 is to automatically save newly acquired ECGs in the directory, once
they are acquired and printed. If the auto save configuration option is set to OFF, and the record is printed, the CP
20 will prompt you to "Save ECG?" SAVE (F1) will store the ECG in the directory.
3-10