Configuration - Welch Allyn CP 20 User Manual

CP 20_______________________________________________________________________Section 3
NOTE: Manually save ECGs by selecting Save (F5) from the Acquired ECG view.
NOTE: If the ECG is not printed you will be prompted to save.
Auto Print ECG
This option defines whether or not the CP 20 will automatically print the ECG after acquisition. If the selected
configuration option is set to OFF, a manual printout is possible after acquisition.
NOTE: If the ECG is not printed you will be prompted to save.
Serial Baud Rate
The user-selectable baud rate determines the serial port's data transmission rate in bits per second (bps). Set the
baud rate to38400 bps for direct data transmission to Welch Allyn CardioPerfect workstation.
Configuration Page 4
Rhythm Leads
Configuration page four defines all rhythm channels that are printed. Define rhythm leads one through six to
customize the standard six-channel rhythm printout. Use (F3) to toggle through each of the 12 leads.
Configuration page four also identifies the 10-second rhythm lead printed in a 3 + 1 channel printout and the three
10-second rhythm leads for the 3+3 channel printout. Use (F3) to make your selection of any of the 12 leads.
NOTE: rhythm acquisition is not stored in memory, only printed.
NOTE: The rhythm lead configuration settings determine what leads are printed in the rhythm printout.
Switching Leads (F2) in the Real-Time ECG display does not affect what rhythm leads are printed.
3-11