Rear Panel; Stereo Outputs; Expression Pedal - Strymon DIG User Manual

DIG
- Dual Digital Delay User Manual

Rear Panel

INPUT
INPUT
High impedance input.
Default configuration is
mono input. Can be used
as TRS stereo input by
flipping internal jumper
switch.
See page 10 for TRS stereo
input information.

EXPRESSION PEDAL

Connect a standard TRS
expression pedal for
continuous control over any
one knob with your foot.
See page 7 for EXP jack setup.
EXP LEFT OUT RIGHT OUT

STEREO OUTPUTS

Use LEFT OUT for mono signal
output. Use both outputs for
stereo operation.
OR
9VDC
-
+
POWER
Maximum 9 volts DC center
negative, with a minimum of
250mA current.
TAP / FAVORITE SWITCH
Connect an external tap switch to tap in your
delay time. Or plug in a Favorite switch to
save and recall a favorite preset.
See page 7 for EXP jack setup.
®
TRS
®
pg 6