Work Stage - Ravelli HR EVO 200 SMART Use And Maintenance Manual

EN
Rev.1 08/09/2021
Pag.40

Work stage

After the 'STARTUP' stage, the boiler goes to the 'WORK' mode which is the normal operation mode.
Status
WORK
WORK MODULATE
BRAZIER CLEANING
The user can adjust the heating power from the max. value of 5 to a min. of 1 with the buttons 'P5' and 'P6'.
DHW circuit function activation ON is displayed by the segment/LED [A].
⚠
⚠
Make sure to check the pellet level in the hopper so that the flame does not go out due to lack of pellets.
⚠
Make sure the unit is off when loading pellets.
⚠
The pellet hopper lid must always remain closed; it must only be opened when loading fuel.
The bags of pellets must be kept at least 1.5 m from the boiler.
Use and maintenance manual HR EVO Smart
Igniter (or resistance)
OFF
OFF
OFF
Devices
Fume extr. Auger
ON
ON
ON
Automatic cleaner
ON OFF
ON OFF
ON OFF
Button 'P6'
Button 'P5'
Power set to 3
Real power in work equal
to 1