Ravelli HR EVO 200 SMART Use And Maintenance Manual
  1. Manuals
  2. Brands
  3. Ravelli Manuals
  4. Boiler
  5. HR EVO 200 SMART
  6. Use and maintenance manual

Ravelli HR EVO 200 SMART Use And Maintenance Manual

Hide thumbs Also See for HR EVO 200 SMART:
Table of Contents

Advertisement

Quick Links

Download this manual
HR EVO 200 SMART
HR EVO 250 SMART

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HR EVO 200 SMART and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ravelli HR EVO 200 SMART

Summary of Contents for Ravelli HR EVO 200 SMART

  • Page 1 HR EVO 200 SMART HR EVO 250 SMART...
  • Page 3 Type de produit Chaudière à granulés de bois Marchio Trademark Ravelli Marque Modello HR EVO 200 SMART Model HR EVO 200 SMART HR EVO 250 SMART Modèle L'oggetto della dichiarazione di cui sopra è conforme alla pertinente normativa di armonizzazione dell'Unione:...
  • Page 4 Marca / Trademark / Marque / Merk / Marke / Marca Ravelli Modello / Model / Modèle / Model / Modell / Modelo HR EVO 200 SMART HR EVO 200 SMART Classe di efficienza energetica / Energy Efficiency class /Classe d’Efficacité Énergétique / Energie-efficiëntieklasse / Energieeffizienzklasse / Clase de eficiencia energética...
  • Page 5 PRODUKTDATENBLATT FICHA DEL PRODUTO EU 2015/1187 Marca / Trademark / Marque / Merk / Marke / Marca Ravelli Modello / Model / Modèle / Model / Modell / Modelo HR EVO 250 SMART HR EVO 250 SMART Classe di efficienza energetica / Energy Efficiency class /Classe d’Efficacité Énergétique / Energie-efficiëntieklasse / Energieeffizienzklasse / Clase de eficiencia energética...

  • Page 7: Preface

    Incorrect installation, maintenance and improper use of the product relieve the Manufacturer of all liability deriving from use of the stove. For further information and requirements contact your Ravelli-authorised Technical Assistance Centre. All rights reserved. No part of this instructions manual can be reproduced or transmitted through any electronic or mechanical means, including photocopies, recordings or any other storage system, for other purposes that are not exclusively use by the buy- er’s staff, without the express written consent of the Manufacturer.

  • Page 8: Table Of Contents

    Obligations and forbidden actions ........................15 Characteristics of the fuel ............................. 16 Non-permitted fuels ..............................16 TECHNICAL CHARACTERISTICS ....................17 Technical diagram HR EVO 200 Smart, HR EVO 250 Smart ................18 Main parts ................................19 Description of operation ............................19 Automatic cleaning system ............................ 20 Recharge the fuel ..............................
  • Page 9 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.9 BOILER USE ..........................37 Introduction ................................37 Description of control panel ..........................37 Check before lighting ............................. 39 Auger loading ................................39 Switching on and startup stage ..........................39 Failed ignition ................................. 39 Work stage ................................

  • Page 10: Identification

    IDENTIFICATION Stove identification Type of product PELLET BOILER Trademark Ravelli Model HR EVO 200 Smart - HR EVO 250 Smart Manufacturer identification Manufacturer Aico S.p.A. Via Consorzio Agrario, 3/D - 25032 Chiari (BS) - Italy T. + 39 030 7402939 info@ravelligroup.it...

  • Page 11: Warranty

    Use and maintenance manual HR EVO Smart Pag.11 WARRANTY Certificate of warranty Ravelli thanks you for the trust granted with the purchase of one of its products and invites the purchaser to: • read the installation, use and maintenance instructions for the product; •...

  • Page 12: General Information

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.12 GENERAL INFORMATION Supply and safe-keeping The manual is supplied in printed format. Keep this manual safe, with the appliance, so that the user can consult it easily. The manual is an integral part, for safety reasons, therefore: •...

  • Page 13: Residual Risks

    If the chimney catches fire you must call the fire brigade. ⚠ Only use original spare parts. Any tampering and/or replacements that have not been authorised by Ravelli can pose a danger to the user’s safety. ⚠ In the event of particularly adverse weather conditions, the safety systems could intervene and switch off the appliance.

  • Page 14: Description Of The Appliance

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.14 Residual Description procedure-related information risk When the appliance is running, it may reach high Risk of temperatures to the touch, especially on its external burns surfaces. Take care to avoid burns and use the specific tools if necessary.

  • Page 15: Obligations And Forbidden Actions

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.15 Obligations and forbidden actions Obligations The user must: • read this instructions manual before performing any operation on the appliance; • the appliance must not be used by children under the age of 8 or by people with reduced physical, sensorial or mental capacities or without experience or without the necessary knowledge, and always with supervision;...

  • Page 16: Characteristics Of The Fuel

    A2 and B. Maintain fuels and other flammables at a suitable distance. Ravelli recommends using wood pellet classified A1 and A2 according to the EN ISO 17225-2:2014 standard, or certified DIN PLUS (more restrictive than the A1 class) or ONORM M 7135. Pellet may be light or dark coloured, it is normally bagged into bags that show the name of the producer, the main characteristics and classification according to standards.

  • Page 17: Technical Characteristics

    The data shown here is provided as a guideline and is not binding, and may change based on what type and quality of wood is used. Ravelli reserves the right to make any changes in order to improve product performance.

  • Page 18: Technical Diagram Hr Evo 200 Smart, Hr Evo 250 Smart

    HR EVO 200 Smart HR EVO 250 Smart measurement Height 1300 1300 Width Depth Weight Technical diagram HR EVO 200 Smart, HR EVO 250 Smart 3/4’’ Flow Ø 15 Safety drain 3/4’’ Return Ø 50 (Air inlet) Ø 100 (Smoke outlet)

  • Page 19: Main Parts

    Ravelli’s patented cleaning system minimises maintenance by the user. There is no longer any need to clean the brazier before each lighting and all cleaning operations are reduced to a minimum.

  • Page 20: Automatic Cleaning System

    User training Once installation is complete, the user must always be fully trained in the functions and characteristics of the boiler by the technician authorized by Ravelli to ensure optimal and safe use. The training should cover the following topics: •...

  • Page 21: Safety Devices

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.21 Safety devices The boiler has been designed and equipped with safety systems to minimize user risks. It is equipped with the safety devices listed in the following table, which also intervene in case of failure of the electronic board. Element Description If the water temperature exceeds the set safety value, it immediately stops the pellet...

  • Page 22: Shipping And Installation

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.22 SHIPPING AND INSTALLATION Safety warnings for transportation and installation �� The appliance must be installed by a qualified technician, who must issue a declaration of conformity of the system to the purchaser, taking full responsibility for appliance installation and correct operation.

  • Page 23: Set-Ups For The Smoke Evacuation System

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.23 ⚠ Use suitable equipment to remove the boards or wooden parts of packing. �� The end user is responsible for disposing of the packaging in accordance with the laws in force in the country of installation. ⚠...

  • Page 24: Installation

    �� Ravelli shall not be held liable if these precautions are not followed. Requirements for the installation premises The appliance installation room must be sufficiently ventilated. To fulfil this requisite it is necessary to equip the room with an air intake connected to the outdoors.
  • Page 25 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.25 Installation example This type of installation (See Fig.1) requires an insulated chimney pot, even if the entire conduit is installed inside the building. Besides, the structure must be inserted into a properly ventilated skylight shaft.
  • Page 26 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.26 This type of installation (See Fig.4) requires an insulated chimney pot, even if the entire smoke conduit is installed outside the Protection from rain building. In the lower part of the chimney there is a "T" type fitting installed with inspection cap.

  • Page 27: Other Handling Systems

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.27 Other handling systems The boiler must be handled carefully, avoiding any bumping, always keeping it upright for transport and only using forklifts; alterna- tively, it can be moved using lifting straps connected to the appropriate hooks. Make sure the equipment used for lifting and transport can take the boiler’s weight, specified on the data plate and in this manual.

  • Page 28: Connections

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.28 CONNECTIONS �� The connections must be set up by a technician that is qualified and/or authorised by the Manufacturer. �� By the installer the type of cable, with relative section, to be installed in case of replacement is: H05RR-F sez.3G0,75 ⚠...
  • Page 29 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.29 Electrical connection The plug of the boiler’s power cable must only be connected after the installation and assembly has been completed of the appliance, and must remain accessible after installation. To make the electrical connection, proceed as described below: First connect the power cable to the plug on the back of the boiler and then to a wall socket.

  • Page 30: Connection Of External Probe Or Thermostat

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.30 Connection of external probe or thermostat To manage the boiler using an external thermostat (optional), connect it to the appropriate terminals on the board, as shown in the ⚠ Electric scheme. ⚠...

  • Page 31: Electric Scheme Hr Evo 200 Smart, Hr Evo 250 Smart

    Use and maintenance manual HR EVO Smart PNO100503PX00 Pag.31 18.04.2014 V:2.0 MICRONOVA S.R.L. Electric scheme HR EVO 200 Smart, HR EVO 250 Smart Personalizzazione per: Micronova File: stufa orizzontale Touch slim.cdr Formato file: pdf vettoriale coralDRAW X5 Dimensioni:99 x 55,5mm.

  • Page 32: Plumbing System Connections

    Plumbing must always be carried out by qualified personnel, able to carry out a state-of-the-art installation in compliance with the laws in force in the country of installation, after having read the next chapter. Ravelli denies all liabilities for damages to ⚠...

  • Page 33: Hydraulic Diagrams

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.33 Hydraulic diagrams With this appliance, different types of system can be handled - both those where appliances are directly connected to heating circuits, and more complex systems with accumulators (Boilers, Buffer tanks or both) for DHW production. The hydraulic diagram to be used or the activation of the reading of the appropriate probes must be chosen via the display by an authorised technician when the appliance is installed.
  • Page 34 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.34 Diagram 1 (boiler sensor) Diagram 1 allows operating a heating system where there is also a boiler for DHW production. The boiler can be connected to other heat production units, such as solar panels. With this diagram, the appliance operates to bring the boiler to the set temperature;...
  • Page 35 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.35 Diagram 2 (buffer tank sensor) Diagram 2 can be used in a system where there is a buffer tank that operates the heating system and, if pre-set, also DHW production. In this system, the appliance is directly connected to the buffer tank.

  • Page 36: System Water Characteristics

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.36 Diagram 3 (boiler sensor + buffer tank sensor) Diagram 3 is to be used in a system where both a water buffer tank for the heating system and a DHW boiler are present. The operating logic is similar to that of Diagram 1.

  • Page 37: Use And Maintenance Manual Hr Evo Smart

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.37 BOILER USE Introduction The pellet boiler has the advantage of combining the heat generated by the combustion of wood with the convenience of automatic water temperature management and the possibility of weekly programming of switching on/off, as well as the connection of a thermo- stat and/or chronothermostat and start-stop remote control.
  • Page 38 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.38 The Figure opposite describes the meaning of the status indicators in the left part of the display. Crono Activation of one of the segments signals activation of the corresponding device according to the list opposite Heater Auger Fume extractor...

  • Page 39: Check Before Lighting

    Before relighting the boiler, check that there are pellets in the hopper, that the door and ash drawer compartment are closed, that there are no obstructions to the combustion air inlet system. If the problem persists, it could be due to a technical problem (ignition plug, adjustments, etc ...), so please contact a Ravelli CAT. ��...

  • Page 40: Work Stage

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.40 Work stage After the ‘STARTUP’ stage, the boiler goes to the ‘WORK’ mode which is the normal operation mode. Status Devices Igniter (or resistance) Fume extr. Auger Automatic cleaner WORK WORK MODULATE BRAZIER CLEANING The user can adjust the heating power from the max.

  • Page 41: Modifying The Water Temperature Setting

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.41 Modifying the water temperature setting Heating chamber water To modify the water temperature, press button P1 and then increase or decrease the temperature parameter with buttons P1 and P2. When the water temperature has reached the set value, the power is automatically brought to the min.

  • Page 42: Shutting Down

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.42 Shutting down To shut down the boiler, press the button ‘P4’ for about 2 seconds. The auger is immediately stopped and the fume extractor is brought to high speed, making the message ‘FINAL CLEANING’ appear on the display. At the end of the operation the message ‘OFF’...
  • Page 43 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.43 Position Menu Item Position Level 2º Menu Item Parameter Name Unit Level 3º M-1-3-18 Saturday Prog-2 M-1-3-19 Sunday Prog-2 M-1-3-20 Start Prog-3 M-1-3-21 Stop Prog-3 M-1-3-22 Monday Prog-3 M-1-3-23 Tuesday Prog-3 M-1-3-24 Wednesday Prog-3 M-1-3-25...

  • Page 44: Menu 01 - Chrono Setting

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.44 Menu 01 – Chrono setting Allows all chronothermostat functions to be enabled/disabled; select ON to activate the function and display the relevant segment/LED [ D ] When Daily, Weekly or Week End programming is entered, the appropri- ate segment/LED [ C ] appears in the top right of the display.

  • Page 45: Menu 02 - User Adjustments

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.45 Menu 02 – User adjustments With this menu it is possible to do a number of settings as follows Set clock Before operating with the boiler, it is necessary to set the current time and date so that there is a reference for possible chrono pro- gramming.

  • Page 46: Menu 04 - Boiler Status

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.46 Menu 04 – Boiler status With this selection it is possible to display the instantaneous boiler status giving the operating status of the various devices connected to it; various pages placed in succession are available for monitoring. Menu 05 –...

  • Page 47: Alarm Management

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.47 ALARM MANAGEMENT Alarms are indicated by an acoustic signal (if activated) and a message on the control panel. In case of an alarm, shut down the boiler, eliminate the cause and restart the boiler according to the normal procedure described in this manual.
  • Page 48 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.48 SIGNAL ANOMALY POSSIBLE CAUSES SOLUTION AL B Occurs when the gear- The controller detects a faulty gearmo- Reinstatement operations must be AUG TRIAC motor works continuously tor control relay (contacts stuck). carried out by a service centre.
  • Page 49 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.49 Various signals SIGNAL ANOMALY POSSIBLE CAUSES SOLUTION Occurs on relighting the Reset attempt in shutdown stage with Alarm reset is possible only after shut- AWAITING COOL boiler immediately after boiler hot in cooling stage. down.

  • Page 50: Maintenance

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.50 MAINTENANCE ⚠ Safety warnings for maintenance Maintenance of the boiler must be performed at least once a year and should be planned in advance with the Technical ⚠ Assistance Service. ⚠...
  • Page 51 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.51 Glass cleaning With a cold boiler, clean the glass with a cloth and glass cleaner. Note: there are stove glass cleaning products available on the market. Cleaning the turbulators During operation, dust and soot are deposited on the surface of the heat exchanger tubes. To ensure smooth operation throughout the season, it is advisable to periodically clean the heat exchanger when the boiler is cold.

  • Page 52: Extraordinary Maintenance

    Schedule the above extraordinary maintenance activities with the Authorised Assistance Centre. Deep combustion chamber cleaning �� This operation must be carried out by a Ravelli Assistance Centre. �� Schedule this type of cleaning with the Ravelli Assistance Centre. To clean the combustion chamber, proceed as described below: After cleaning the combustion chamber, it is advisable to proceed with the cleaning of the inspection hatches as indicated in the paragraph “Smoke duct cleaning”.
  • Page 53 Checking the seals �� This operation must be carried out by a Ravelli Service Centre. Plan this type of cleaning with the Ravelli Service Centre. When thoroughly cleaning the boiler, the authorised technician must check that the gaskets of - port - hatches are intact.
  • Page 54 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.54...
  • Page 55 Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.55 Gasket Gasket Inspection hatch Gasket Gasket Inspection Inspection hatch hatch...

  • Page 56: Storage And Disposal

    Rev.1 08/09/2021 Use and maintenance manual HR EVO Smart Pag.56 STORAGE AND DISPOSAL Disposal Demolition and disposal of the appliance is under the exclusive liability and responsibility of the owner who must do so in accordance with the laws in force in the country of installation pertaining to safety, respect and protection of the environment. At the end of its service life, the product must not be disposed of as household waste.
  • Page 57 ITA-Informazioni per la gestione di rifiuti di apparecchiature elettriche ed elettroniche contenenti pile e accumulatori Questo simbolo che appare sul prodotto, sulle pile, sugli accumulatori oppure sulla loro confezione o sulla loro documentazione, indica che il prodotto e le pile o gli accumulatori inclusi al termine del ciclo di vita utile non devono essere raccolti, recuperati o smaltiti assieme ai rifiuti domestici.
  • Page 58 ESP-Información para la gestión de residuos de aparatos eléctricos y electrónicos con pilas y acumuladores Este símbolo que aparece en el producto, en las pilas, los acumuladores o en su embalaje o su documentación indica que el producto y las pilas o acumuladores que contiene, al final de su vida útil, no deben recogerse, recuperarse o desecharse junto con los residuos domésticos.
  • Page 60 Aico S.p.A. Headquarter Via Consorzio Agrario, 3/D - 25032 Chiari (BS) - Italy Research and Development Centre Viale del commercio 12/a - 37135 Verona (VR) - Italy T. + 39 030 7402939 info@ravelligroup.it FB Ravellifuocointelligente IG ravellistufe www.ravelligroup.it Aico S.p.A. does not assume any responsibility for any errors in this booklet and considers itself free to make any variations to the features of its products without notice.

This manual is also suitable for:

Hr evo 250 smart

Table of Contents