General Information; Supply And Safe-Keeping; Language; Symbols Used In The Manual - Ravelli HR EVO 200 SMART Use And Maintenance Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 124
EN
Rev.1 08/09/2021
Pag.12

GENERAL INFORMATION

Supply and safe-keeping

The manual is supplied in printed format.
Keep this manual safe, with the appliance, so that the user can consult it easily.
The manual is an integral part, for safety reasons, therefore:
it must be kept intact (in full). If it gets lost or ruined it is necessary to immediately ask for a new copy:
it must be kept with the appliance until demolition (including relocation, sale, rental, lease, etc....).
The Manufacturer will not be held liable for improper use of the appliance and/or damage caused by operations that are not set forth
in the technical documentation.

Language

The original manual was written in Italian.
Any translations into additional languages must be carried out based on the original instructions.
The Manufacturer is liable for the information contained in the original instructions; the translations into different languages cannot be
fully verified therefore if any inconsistency arises it will be necessary to follow the text in the original language or contact our Technical
Documentation Office.

Symbols used in the manual

symbol
definition
��
This symbol is used to identify particularly important information in the manual. This information also concerns the
safety of users involved in using the appliance.
This symbol is used to identify important warnings for the safety of the user and/or the appliance.

SAFETY MEASURES

General safety warnings

��Read this instructions manual carefully before appliance
installation and use. Failure to observe the instructions set
forth herein can void the warranty and/or cause damage to
property and/or people.
Appliance installation, system verification, operation verification
and initial calibration must be carried out exclusively by qualified
and authorised staff.
The appliance needs to be connected to a single chimney
that guarantees the draught declared by the Manufacturer
and observes the installation regulations that apply to the
installation site.
The room where the appliance is installed must have an air
intake.
The appliance must not be used as an incinerator or differently
from its purpose
Use and maintenance manual HR EVO Smart

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr evo 250 smart

Table of Contents