Data Replay : How To Replay Captured Data - GRAPHTEC GL840 Quick Start Manual

4. Data Replay : How to Replay Captured Data

After capturing the data, you can replay the captured data.
The captured files are stored in the "TEST" folder of the internal memory (SD1) set
in "2. Settings" section.
The file name is set automatically, so it will be created with the file name
"Date-Time_.GBD".
The date and time is the time when capturing started.
Explanation of basic operation in the GL840 is completed.
The GL840 has many other convenient functions. Please refer the next five pages for
details.
1. Selecting a file to replay
(1) Press the [REVIEW] key.
(2) Since the file you want to replay has the file name that was appended
automatically when the data was captured, move the cursor to the [OK]
button and then press the [ENTER] key.
(3) The Replay screen opens.
2. Replay screen
1. Scroll bar
5. Cursor
1. Scroll bar
2. Level display area
3. Quick settings
4. Time display
5. Cursor
Press the [QUIT] key to end the data replay operation.
A confirmation message is displayed. Press the [ENTER] key.
Data replay ends, and the GL840 goes into the Free Running status.
2. Level display area
3. Quick settings
: Displays the position within the whole data and the
display width.
: Displays the levels of A and B cursors and the
difference between the A and B values.
: Use the keys to search the previous or next
level. (Note: Make search settings in the menu.)
: Displays the sampling interval and the time of the
cursor.
: Displays the cursor. (Note: Press the CURSOR key
to switch between A and B cursors.)
Move the cursor using the
keys.
Desired level values and time can be checked by
moving the cursor.
4. Time display
keys or the
16