Table of Contents
Advertisement
English
USER'S GUIDE
OPERATING AND STORAGE ENVIRONMENT
Power Supply
Environment
1–6
Please take note of the following before using the printer:
Use the printer within the specified power range.
AC power:
±10% of the rated power voltage in your district
Frequency:
50 Hz (220 V– 240 V) or 60 Hz (110–120 V)
The power cord, including extensions, should not exceed 5 meters (16.5
feet).
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier, shredder etc. If it is unavoidable
that you must use the printer with these appliances, it is recommended
that you use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
Use the printer only within the following ranges of temperature and
humidity:
Ambient temperature:
Ambient humidity:
Ventilate the room where you use the printer.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not place the printer in a dusty place.
Do not place the printer where the ventilation hole of the printer is
blocked.
Do not place the printer where it is exposed to direct sunlight. Use a blind
or a heavy curtain to protect the printer from direct sunlight when the
printer is unavoidably set up near a window.
Do not place the printer near devices that contain magnets or generate
magnetic fields.
Do not subject the printer to strong physical shocks or vibrations.
Do not expose the printer to open flames or salty or corrosive gasses.
Do not place objects on top of the printer.
Do not place the printer near an air conditioner.
Keep the printer horizontal when carrying.
10°C to 32.5°C (59°F to 90.5°F)
20% to 80% (without condensation)
Advertisement
Table of Contents
