Special Conditions For Safe Use; Installation & Debugging; Cautions Before Installation - Veilux SVEX-T100 Instruction Manual

SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
Dielectric strength: dielectric test of 50Hz, AC1500V shall be conducted between power
terminal and the enclosure for 1min; dielectric test of 50Hz, AC500V shall be conducted
between wiring terminals and the enclosure; no breakdown or flashover allowed.

1.8. Special conditions for safe use


Engaged length and engaged threads are greater than values in IEC/EN 60079-1;

Width of the flameproof joints are greater than values specified in EN/IEC60079-1;

Yield stress of the flameproof enclosure fasteners shall be no less than 450MPa;

Ambient temperature: -40ºC~+60ºC.
2. Installation & debugging

2.1. Cautions before installation

Accessories in packaged product:
1) SVEX-T100A or SVEX-T100B main set, 1pcs;SVEX-T100
2) M6 inner hexagon spanner, 1pcs;
3) Stopping plugs, 2pcs;
4) CoC, instruction manual (with ATEX cert.), 1pcs for each;
F type wrench, 248×16×10, optional□;
5)
Wall mounting support, universal joint, optional□ (require: 9×M6×14 screws with flat
6)
washers and spring washers; 5×M6 nuts, pcs)
Other tools in installation:
1) Cross screw driver: 6×150, 1pcs;
2) Outer hexagon adjustable wrench: 300×36, 1pcs.
Cautions in service:

It's not suggested for users to dismantle this product at will, please follow the
Instruction for operation.

The power must comply with requirements specified in 1.5.

Please use this product in conditions (atmosphere pressure, temperature and
humidity) specified in chapter 1.6.

Since Ex product is very special, debugging with power before installation if
available.
4