Veilux SVEX-T100 Instruction Manual page 8

SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
Ex structure instruction
 We have made adequate consideration in flameproof enclosure
design of the explosion-proof camera to prevent explosive gases
getting into the inner volume, the explosion inside the enclosure
cannot cause the explosion of the external explosive gases. We
ensure the explosion-proof performance by strengthen enclosure
the strength, adjust the length and gap of the joint of associate
components and limit the maximum surface temperature.
 The enclosure is able to subject to static pressure test (1.8MPa
for at least 10s) specified in EN60079-01:2014/IEC60079-1: 2014,
no leakage or deformation allowed after test.
 The maximum surface temperature will no more than 80ºC in
normal operation.
 Tempering glass is adopted in observation port, the tempering
glass shall pass the impact and thermal shock test.
 Ingress protection level: IP68 (1.2m/45min).
 Protection the flameproof surface in maintaining of this product,
otherwise the damaged flameproof surface will affect the
Explosion-proof performance.
SVEX-T300
SVEX-T100
VI