Veilux SVEX-T100 Instruction Manual page 6

SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

Protect the power cable from trample or compressing, especially
for the plug, socket and joint out from devices.
4. Service condition requirements

Please do not focus the camera to hard light (such as lamp or
sunlight), which will cause too bright of the image, it's not
malfunction but it does will affect the duration of the CCD (or
CMOS).

Transport, operate and store this product in applicable
temperature and humidity range. Do not locate it in wet,
overheated (over +60ºC), extreme cold (less than -40ºC)
environment or area with strong electromagnetic radiation or
unstable lighting conditions.

The product shall be protected from any entry of water or other
conductive fluid, which may damage the internal electrical
element.

Avoid overheated, the product shall be well ventilated.

Avoid damage caused by compressing or violent vibration in
transmission, storage or operation.

The product shall be well packaged as new product or equivalent
in transmission.

We suggest using this product with Lightning Protection Devices.

Internal and external grounding shall be reliable and the
cross-sectional area shall be no less than 4mm
5. Operation & maintenance requirements

Do not dismantle this product; there is no user serviceable part
inside.

Do not touch the CCD (or COMS) directly; a proper way is to blow
away the dust with a blower on the lens. If it is necessary to clean
it, use soft cloth with a little alcohol to wipe the lens gently.
Replace the cover when not use to protect the CCD (or COMS).

Soft, dry cloth can be used for camera body cleaning. For dirt not
easy to clean, some neutral detergent can be used, clear the dirt
away then dry the camera body. Corrosive agent, abrasive
cleaner cannot be used for camera cleaning, they may damage
the surface or even decrease the service performance.

This product shall be installed and repaired by authorized
personnel, please do not dismantle or repair it by yourself. Only
manufacturer indicated components / accessories can be used
when replacement is necessary.
IV
2
.