SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
Figure 1.4.1 Dimensions of SVEX-T100 WITHOUT WIPER / SVEX-T300 WITH WIPER
Figure 1.4.2 Distribution of installation holes of SVEX-T100 WITHOUT WIPER /
1.5. Electrical parameters
Voltage and current:
Consumption:
Electrical connection:
Communication type
Control communication speed:
Control communication Protocol:
Fast Ethernet electrical signal interface(optional):
Video signal (optional):
Audio(optional):
Alarm(optional)
Address code:
1.6. Service condition
Atmosphere pressure:
Ambient temperature:
Relative humidity:
1.7. Electrical safety (in normal atmosphere)
Insulation resistance: the insulation resistance between power terminal and the enclosure shall
be no less than 50 MΩ;
Explosion-proof Camera
SVEX-T300 WITH WIPER Explosion-proof Camera
80~110kPa
-40ºC~+60ºC
no more than 95% (+25ºC)
100~240V AC or 24V AC; Max. 1.5A
≤36W(excl. the heating fan)
Comprehensive cable
RS-485
2400~19200bps adjustable
PELCO-D/PELCO-P
full duplex TCP/IP Protocol Ethernet
interface transmission
1-way video output
1-way input, 1-way output
2-way alarm input, 1-way alarm output
0/1
3