Preparing The Base - Danfoss ECdry 55 Installation Manual

Installation Guide
1�1

Preparing the base

Before you start installing the product,
please ensure that the floor is:
• Permanently inflexible
• Dry
• Flat and regular
• Dust- and fat-free
• Free from any sharp objects
Use a powerful vacuum cleaner to remove
all dust from the floor.
Remember to install a 0,20 mm vapour barrier on the subfloor
Danfoss © | 2020.07
Danfoss ECdry Touch Kit
before rolling out the heating mats.
AN324050550815en-000201 | 13