Table of Contents
Advertisement
Installation Guide
Installing Supply Cord or Extension Cords:
The cords must only be placed in the filler
material and not over/in the heating element.
The filler material shall be cut so it envelopes
the cords. The ECdry X can withstand maxi-
mum 10 A.
Element size
1 m²
2 m²
3 m²
4 m²
5 m²
1 m wide filler materials without heating (1, 2 and 4 m)
Make sure that no hot spots develop when
using the floor heating system. Avoid hot
spots by ensuring that the heat from the floor
heating is homogeneously released to the
area you wish to heat and that there is free
space (ventilation) under the furniture.
12 | Danfoss © | 2020.07
Danfoss ECdry Touch Kit
Standard length
1 m
2 m
3 m
4 m
5 m
When designing the layout, make sure not
to install ECdry heating element under per-
manent or built-in cupboards or fire places/
ovens. ECdry have to be separated from
other heat sources such as chimneys. Instead
ECdry filler material should be used.
Minimum length
0,5 m
1,5 m
2,5 m
3,5 m
4,5 m
AN324050550815en-000201
Advertisement
Table of Contents
