Installing The X-Ray Generator Assembly - Vatech EzRay Air W Installation Manual

3.5

Installing the X-Ray Generator Assembly

1. Attach the the X-ray Generator Assembly to the scissor arm while making sure that the
cables from the Scissor Arm go through the X-Ray Generator Arm's hole.
2. For information about connecting cables, please see '3.6.4 Cabling between the
Scissor Arm and the X-ray Generator' on page 38.
3. Attach the stopper to the rear top of the X-ray Generator Arm, and tighten the bolt
above the attached stopper.
EzRay Air W (Model: VEX-S300W) Installation Manual
Handle the X-Ray tube head with care when installing the X-Ray tube
head.
3. Installing the Equipment
31