National Instruments MXI Getting Started page 40

MAX Settings
© National Instruments Corporation
Table A-10. Device Tab Default Settings
Editor Field
Logical address
Address space
Requested memory
A24/A32 write posting
A16 write posting
Interlocked mode
* Assumes no DRAM is installed. If DRAM is installed, the Address space should be
A32, and Requested memory should match the amount of DRAM. If you install the
DRAM yourself, you must manually specify these changes.
Table A-11. VXI/VME Bus Tab Default Settings
Editor Field
Bus timeout value
Slot 0 configuration
Auto retry
Transfer limit
Arbiter type
Fair requester
Arbiter timeout
Request level
A-7
Appendix A
Default Setting
Use DIP switch
A24 *
16 KB *
Disabled
Disabled
Disabled
Default Setting
125 µs
Auto-detect
Disabled
256
Priority
Enabled
Enabled
3
PCI-Based MXI-2 Interfaces for Windows 2000/NT/Me/98
Default Settings