Table of Contents
Advertisement
6
Setup Send
6
Before You Begin
You can send a fax from the ADF (Automatic Document Feeder) or from the
scanner glass.
Sending Faxes Using Multiple Settings
When you send a fax you can choose any
combination of the available settings:
add a cover page and select a comment;
set the contrast or resolution; send using
overseas mode, or delayed fax timer,
polling transmission or real time transmission. After each function is accepted,
the LCD will ask if you want to enter other settings:
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and go to the
next step.
Faxing from the ADF (Automatic Document Feeder)
The ADF can hold up to 50 pages, feeding each one individually through the
MFC. Use standard (20 lb/75g/m
the pages well first.
Temperature:
Humidity:
Paper:
DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. (To
fax this kind of original, See
Make sure documents written with ink are completely dry.
Originals to be faxed must be from 5.8 to 8.5 inches wide, and 5 to 14 inches
long.
2
) paper when using the ADF and always fan
68°F – 86°F (20°C – 30°C)
50% – 70%
Xerox 4200 (20LB/LTR),
Xerox 4024 (24LB/LTR),
Faxing from the Scanner Glass
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
, page 6-2.)
S E T U P S E N D
6 - 1
Advertisement
Table of Contents
