Table of Contents
Advertisement
Real Time Transmission
When you are sending a fax, the MFC will scan originals into memory before sending.
Then, as soon as the phone line is free, the MFC will start dialing and sending the fax.
If memory becomes full, the MFC will send the document in real time, even if REAL
TIME TX is set to OFF.
Sometimes you may want to send an important document immediately, without
waiting for memory transmission. You can set REAL TIME TX to ON.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Function, 1, 3, 8.
3
To change the default setting, press
to select ON (or OFF) and press Set.
Go to Step 5—OR—
For the next fax transmission only, press
and press Set.
4
For the next fax only, press
5
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings and go to
Step 6.
6
Enter fax number and press Start.
Color faxes will be sent in real time even if REALTIME TX is set to OFF.
Checking the Job Status
Check which jobs are still waiting in memory to be sent. (If no jobs are waiting,
the LCD shows NO JOB WAITING.)
(See Canceling a job in Memory below.)
1
Press Function, 1, 4.
2
If you have multiple jobs waiting, press
3
Press Stop to exit.
6 - 6
S E T U P S E N D
8.REAL TIME TX
or
REALTIME TX:ON?
to select NEXT FAX ONLY
or
to select ON (or OFF) and press Set.
or
to scroll through the list.
or
Advertisement
Table of Contents
