Table of Contents
Advertisement
ERROR MESSAGE
NOT REGISTERED
NO FILE
PLS OPEN COVER
PRINTER JAM
SET CARTRIDGES
WARMING UP
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
ERROR MESSAGES
CAUSE
You tried to access a One Touch or Speed
Dial number that is not programmed.
The media card in the media drive does not
contain a .JPG file, or the DPOF print file
on the media card selects a .JPG image that
is not on the card.
A page, piece of paper or paper clip, etc.
may be jammed inside the MFC.
The paper is jammed in the MFC.
An ink cartridge is not installed properly.
The print head detects low temperature.
ACTION
Set up the One Touch or Speed Dial
number.
See page 7-1.
™
See PhotoCapture Center
page 12-9.
Press the Scanner Cover Release Button
and lift the scanner cover. If you see any
jammed paper or other item, gently pull it
out, then close the scanner cover. If the
error message remains, open and close the
scanner cover again. If the MFC cannot
reset itself and return to the date and time
prompt, it will display MACHINE ERROR
XX. Please call Brother Customer Service
and tell them the Machine Error number, at:
USA:
1-800-284-4329
From within Canada:
1-800-853-6660
From within Montreal: 1-514-685-6464
See page 23-4.
Re-install the ink, seating it properly. See
page 23-16.
Wait until the MFC warms up.
Requirements,
23 - 3
Advertisement
Table of Contents
