Table of Contents
Advertisement
Computer Requirements
The following are the minimum computer requirements you need to set up and
operate the MFC drivers.
®
Windows
Operating
System
95, 98, 98SE
NT 4.0
Workstation
2000
Professional
ME
Use only a shielded parallel interface cable that is IEEE-1284 compliant
and/or a USB cable that is no longer than 6 feet long (1.8 meters).
Using a Bi-directional IEEE-1284 Compliant
Parallel Cable to Connect the MFC to the PC
(Using Windows
Windows NT
Windows
®
To install the software using Windows NT
®
Windows
2000 Professional, you must be logged on as the Administrator.
Before you can connect the MFC to your computer, you must purchase a
Note
bi-directional IEEE-1284 compliant parallel cable that is no longer than 6 feet
(1.8 meters).
If you are using USB cable, see Using a USB cable to Connect the MFC to the
Note
PC on page 13-17.
Notice to PC User
A small filter core and cable tie are enclosed in the vinyl bag with your MFC.
PLEASE SAVE THESE PARTS. You will need them in the future if you
connect the MFC to a Personal Computer. For optimal performance, use a
bi-directional parallel cable with the enclosed Filter Core and Cable Tie.
13 - 2
S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R
COMPUTER REQUIREMENTS
Speed
(or Higher)
Pentium 75MHz
Pentium 75MHz
Pentium 133MHz 64MB (128MB rec.) 50MB
Pentium 150MHz 32MB (64MB rec.)
®
95, 98, 98SE, ME,
®
Workstation Version 4.0 and
2000 Professional)
IMPORTANT
RAM
24MB (32MB rec.)
32MB (64MB rec.)
®
Workstation Version 4.0 or
HD
CD-ROM
Space
Speed
50MB
2X
50MB
2X
2X
50MB
2X
Advertisement
Table of Contents
