If your Station ID has already been programmed, the screen prompts "1" to
make a change or "2" to exit without changing.
Entering Text
When you are setting certain functions, such as the Station ID, you may need to
enter text into the MFC. Most number keys have three or four letters printed
above them. The keys for 0, #, and
used for special characters.
By pressing the appropriate number key the correct number of times, you can
access the character you want.
Press Key
2
3
4
5
6
7
8
9
Inserting spaces
If you want to enter a blank space, press
between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press
cursor after the last correct letter. Then press Stop; all letters above and to the
right of the cursor are deleted. Re-enter the correct text and/or digits. You can
also back up and type over incorrect letters.
Repeating letters
If you need to enter a character assigned to the same key as the previous
character, press
4 - 2
I N I T I A L S E T U P
don't have printed letters because they are
one time
two times
A
B
D
E
G
H
J
K
M
N
P
Q
T
U
W
X
to move the cursor to the right.
three times
four times
C
F
I
L
O
R
V
Y
once between numbers and twice
S
Z
to move the